Il contenuto di questa pagina richiede una nuova versione di Adobe Flash Player.

Scarica Adobe Flash Player

MACCHINE UTENSILI / MACHINE TOOLS

N.C. PUNCHING LINE WITH MOULD FOR DOUBLE VERTICAL PUNCHING


   The machine punches two tubes at a time, according to the set programme,
on one wall and can perform two holes of different section in a single run
through the machine. The mould is precise and reliable and is equipped with
expansion cores with interchangeable dies. By changing both the cores and the
external guides to the tube it can punch tubes of different sizes. Moreover,
with the same mould it is possible to punch tubes with a different thickness
simply by changing the dies on the cores.

Click here to watch the video

2 AXIS LENGHT STOP VISUALISED


   This new device needs to visualized the “x” axle that measure the distance
between one curve to the other one. The “Y” axle measure the tube rotation in
grades of precision.

This device installed on rotary tube tool can be equipped of pneumatic
extraction core device in case the core are bent.

It can be realized in measures of 1mt, 2mt, 3mt.

Click here to watch the video

TOOL WITH AUTOMATIC CORNER CORRECTION H200


   For P320 and P400 Horizontal Press

Tool with “V” mobile die 80mm 89° H200mm with bending corner correction
reader, complete of Model Max40 programmer, with possibility to program
from Pc on Windows 70 equipped of Usb connection.

Click here to watch the video

CUT DRILL NC
2-HEAD AND 2-AXIS EASY DRILL WITH PROGRAMMABLE SAW AND SPEEDY 3000


   Machine to drill bars with varying center distances on both the width and the
length of the piece and of performing the cutting on the drilled bars automatically
by simply setting a programme.
Equipped of a feeder 3 mt long that can be extended up 6mt long installing a
roller conveyor of the desired length.
The max. size of the profiles that can be processed by the machine
is 150x60 mm.
Max. drilling diameter: 18mm
Max saw diameter disk: 375mm

Click here to watch the video

PMV PUNCHING LINE 30 TONS.


    

PMV PUNCHING LINE 30 TONS. WITH 2 CONTROLLED AXES FOR DOUBLE PIPE AND WITH MULTIPLE PUNCHES

Click here to watch the video

NEW TOOL FOR TWIN FOR “UPN”PROFILES


    

New tools for N.C. Twin punching line with 4 heads.
The machine punches UPN profiles with width up to 120mm and can make 4 holes’ lines up to the ends of the bar.
The heads are independent and each one works with its dedicated program.
Each punch can make holes with different shapes. Each punch can also make holes with different pitches.
The punching heads have 25ton power each.
The length of the bars can be from 1 to 6 Mt.

Click here to watch the video

TOOL WITH AUTOMATIC CORRECTION


   It is a specific tool for bending bars with the possibility to programme the
bending angle set on the programmer of the presses. It allows to obtain precise
bends on the first part already, thus avoiding operator's errors.
Just enter the desired bending angle on the programmer and the machine
automatically recovers elasticity of material.
It is manufactured in two versions: with “V” 50 mm and “V” 70 mm.
The latter version can bend flat bars of a desired size up to 150X12mm.

Starting from February 2015 the tool is also available in the version for
bending iron.

Click here to watch the video
Click here to watch the video

ROTARY TUBE-BENDING TOOL


        The video shows the rotary tube bending tool combined with
     the displayed positioner which determines the precise distance
     between a bend and the other; graduated rotation of the tube
     is also possible.
     It performs high-quality bends; it can be equipped with mandrel,
     core and core ejection device.
     Max length of the positioner: 3000 mm
     It can be supplied with or without an articulated core inside the
     tube.
     Automatic extractor for removing the core with a stroke of 100 mm.
     It can bend up to 180°
     Max tube Ø : 42 mm.
     Minimum bending radius: 60 mm.
     Maximum bending radius: 127 mm.

     Click here to watch the video

ROTARY CURVE-BAR BASE TOOL


  
       ROTARY CURVE-BAR BASE TOOL


     • Can be combined with a motorized bar positioner with gripper
        or displayed without gripper.
     • Can make curves up to 270°
     • Can bend bars up to 60X8mm
     • By replacing the matrices, curvatures can be performed up to
        a radius of 80mm.


     Click here to watch the video