Il contenuto di questa pagina richiede una nuova versione di Adobe Flash Player.

Scarica Adobe Flash Player

MACCHINE UTENSILI / MACHINE TOOLS

 

Samples Video

 SIMPLIFIED TWIN – CNC PUNCHING LINE EQUIPPED WITH 2 HEADS
 15 TONS


Our tube punching machine “Simplified Twin” is equipped with a single feeder that
moves and places the tubes according to a programme, set and stored on the
programmer.
The operator puts a tube on a support aligned with the machine, which can be
equipped with a pneumatic pusher specifically for automatically inserting the tube
in the machine. After punching, the tube is positioned on the support again, in
order to be replaced.
Our Twin can punch either a row, or two rows of holes on the same tube at the
same time, according to the tools installed, it can punch either one or two tubes
at a time.
The machine comes with useful accessories, and tools for performing various types
of punching action, even on tubes of different sizes.
 

 

Samples Video

 TWIN – CNC PUNCHING LINE EQUIPPED WITH 2 HORIZONTAL HEADS
 22 TONS


Our tube punching machine “Twin” is equipped with feeders that move and place
the tubes according to a punching programme set on the programmer.
Our Twin can punch either a row, or two rows of holes on the same tube at the
same time, if it is equipped with a rotary vice for round tubes, it can punch different
rows of holes on the same tube.
Our Twin can be supplied with either one or two additional heads; this way, either
square or rectangular tubes can be punched on all 4 sides in a single run in the
machine, according to the tools installed, it can punch either one or two tubes
at the same time.
Our Twin can be manufactured in two models: Classic or Simplified.
The Classic Twin is equipped with punches running at three speeds that can be
selected and it can punch either two or more holes at a time in a second.
Our Simplified Twin is generally equipped with an automatic bar feeder and a specific
bench for inserting the tubes in the machine.
Our Twin can be equipped with a lot of optional tools that make it the best
performing machine on the market.
The machine comes with useful accessories and tools for performing various types
of punching action, even on tubes of different sizes.
 

 

Samples Video

 TWIN WITH CNC BAR STORAGE SYSTEM


Our punching machine “Twin” can be supplied with an automatic storage system
for tubes that are loaded and unloaded, by means of an intermediate manipulator
equipped with a double clamp for catching parts.
Thanks to this system, our Twin is able to punch tubes that are up to 7 metres
long, in a non-stop cycle, fully independently. This machine allows a great labour
saving, so it can be amortized in a short time (see video).
 

 

Samples Video

 TWIN WITH MACH 3


Our punching line “Twin”, which is our strong point, can be manufactured in various
lengths and equipped with an automatic storage system for loading and unloading
tubes, thus reducing the use of an operator to the minimum.
Operators can work safely thanks to photocell barriers integrated into solid 2-meter
high yellow or black nets around the machine.
Our TWIN can punch 4 slots at a time and machine two tubes simultaneously thus
doubling productivity. It is equipped with two opposing heads and can also be
supplied with a third vertical head.
The tools which come with the machine, are technologically innovative in materials
and applications, thus allowing the tubes to slide at a high speed without scratches.
This machine can process either semi-oval, or rectangular tubes without any
bubbles thanks to our exclusive system.
Another important aspect is a specific system for quickly changing tools and
accessories; made up of joints, this system reduces the use of screws to the bare
minimum.
Work precision is ± 0,2 mm from first to last hole.
Our company produces a CNC Cartesian axis manipulator, called MACH 3, for
loading and unloading tubes. It loads the tubes, to punch and unload them, after
punching on two pallets.
It has been specifically designed to be combined with our punching line Twin,
but it can also be combined with other punching lines belonging to our range
of machines.
It can quickly change the size and move the tubes by means of a magnetic clamp
suitable for all sizes, thus positioning the tubes fast and precisely.
This manipulator makes the punching line fully automatic and positions the bars for
safe punching.
 

 

Samples

 MODULAR COMPACT 10 TONS


Our Modular is a punching machine for tubes and profiles, it is suitable for punching
blind or through holes on the ends of a tube at a maximum distance of 300 mm.
The machine is equipped with an electric control board with an electric “START”
pedal.
It is a reliable, simple machine.
It can be equipped with tools according to customers' specific demands.

 

 

Samples Video

 MODULAR - CNC PUNCHING LINE EQUIPPED WITH A VERTICAL HEAD


Our Modular for punching tubes and profiles, is normally equipped with a bar feeder
called “Speedy” complete with step-by-step motors, thanks to which, it can reach
a top speed of 12 meters per minute.
Our Modular is manufactured in two models each with a different capacity , that is
6.5 tons and 10 tons. A second punching head, aligned with the first one, can be
added to this machine; this way, the profiles can be automatically punched and cut
to the desired length.
Our Modular is suitable for punching bars of various lengths, which are punched
according to the programme set on the programmer. It is sold complete with
specific accessories and tools for punching the parts according to the final
customer's request.

 

 

Samples Video

 MODULAR - CNC PUNCHING LINE EQUIPPED WITH A HORIZONTAL
 HEAD 10 TONS


Our punching machine “Modular” equipped with a single horizontal head is specific
for punching tubes on a single wall. It is widely used to punch radiator manifold
systems and the vertical sides of ladders.
Its pecuniary feature, is its system for unloading scraps on the same side as the
punch enters after punching a tube, thus leaving it thoroughly clean from scraps.

 

 

Samples Video

 MODULAR - PUNCHING LINE WITH 2 HORIZONTAL HEADS


Our Modular for punching tubes and profiles, is normally equipped with a bar
feeder called “Speedy”, complete with step-by-step motors, thanks to which it can
reach a top speed of 12 meters per minute.
Its two punching heads have a capacity of 6.5 tons each.
The tubes are positioned according to the programme set and stored on the
programmer. This machine can simultaneously punch either one or two rows of
holes on the same tube. It can be supplied with an additional vertical head, so
that either square or rectangular tubes can be punched on 3 or 4 sides in a
single run in the machine.
It is suitable for punching tubes of various lengths according to customers'
demands.
This machine is supplied complete with all specific accessories and tools for
punching different sized tubes.

 

 

Samples Video

 MODULAR – CNC PUNCHING LINE EQUIPPED WITH 3 HEADS 10 TONS


This Modular, equipped with 3 independent heads for punching either tubes or
profiles, is able to punch one to four walls of a tube, according to different
punching programmes and customers’ demands.
This machine is simple to use; up to 99 punching programmes can be stored in the
programmer.
It can be supplied to punch 1 to 7 metre long bars, according to specific demand.
The machine comes with a quick changing system for the tools and its quality,
price ratio is excellent.

 

 

Samples Video

 CNC PUNCHING LINE “MODULAR” EQUIPPED WITH 2 ALIGNED

 VERTICAL HEADS 10 TONS


This type of Modular with two vertical heads is normally equipped with a bar feeder
“Speedy”, with step-by-step motors, thanks to which it can reach a maximum
speed of 12 meters per minute.
This machine can be used for two working types at the same time; it can either
make two different holes on the same wall of a tube or profile, cut and punch
profiles to a desired size in automatic mode.
On this machine, but also on all our punching machines, punching steps are
obtained by setting a working programme in the programmer.
In this case, it is possible to programme on two “zero-settings”, each one,
punching or shearing heads.
According to demands, we can supply this machine to process bars, that are 2 to 7
meters long.

 

 

Samples Video

 CNC PUNCHING LINE “PMV 30 T” EQUIPPED WITH A VERTICAL HEAD


Our PMV machine for punching tubes or profiles, is normally equipped with a bar
feeder “Speedy” with step-by-step motors, thanks to which it can reach a
maximum speed of 12 meters per minute.
As an alternative, it can be equipped with an ALX feeder to reach a handling speed
of 60 meters per minute.
It is possible to combine a second punching head in line to the standard one; this
way, profiles can be automatically punched and cut to a desired size.
This machine is suitable for punching bars of various lengths according to a specific
programme set on the PLC.
Our PMV is quoted complete with customized accessories and tools.


NEWS
PMV PUNCHING LINE 30 TONS. WITH 2 CONTROLLED AXES FOR DOUBLE PIPE
AND WITH MULTIPLE PUNCHES
Click here to watch the video
 

 

Samples Video

 CNC PUNCHING LINE “PMV 50 T” EQUIPPED WITH A VERTICAL HEAD


Our PMV machine for punching tubes or profiles, is normally equipped with a bar
feeder “Speedy” with step-by-step motors, thanks to which it can reach a
maximum speed of 12 meters per minute.
As an alternative, it can be equipped with an ALX feeder to reach a handling
speed of 60 meters per minute.
It is possible to combine a second punching head in line to the standard one;
this way, profiles can be automatically punched and cut to a desired size.
This machine is suitable for punching bars of various lengths according to a
specific programme set on the PLC.
Our PMV is quoted complete with customized accessories and tools.